Assystem
Senior EC&I Engineer Template
Bengaluru, KA, India · On-site · Full-time
Apply on the employer’s site ↗See how well you match this job
You apply directly with the employer. ROLIVA does not submit applications from this page and is not the employer.
About the role
Description from the employer’s posting. Check the employer’s page for the current version.
- EmployerAssystem
- LocationBengaluru, KA, India
- Work styleOn-site
- Employment typeFull-time
- Employer posted
Job Title: Electrical & Instrumentation (E&I) Design Engineer
Industry: Water Supply & Sewerage Infrastructure
Department: Engineering / Design
Reports To: Project Manager / Lead E&I Engineer
Job Summary
The Electrical & Instrumentation (E&I) Design Engineer is responsible for detailed engineering, design, and coordination of electrical and instrumentation systems for water supply, sewerage networks, pumping stations, Water Treatment Plants (WTP), and Sewage Treatment Plants (STP). The role includes preparation of design documents, drawings, BOQs, technical specifications, vendor coordination, and support during execution and commissioning.
Key Responsibilities
1. Electrical Design – General
- Prepare electrical load calculations and power distribution schemes
- Design HT/LT systems (11kV/33kV/415V as applicable)
- Transformer sizing and substation layout design
- Diesel Generator (DG) sizing and synchronization schemes
- Cable sizing calculations (power & control cables)
- Preparation of Single Line Diagrams (SLD)
- Earthing and lightning protection system design
- Illumination and small power layout
- Preparation of BOQ and technical specifications
- Vendor drawing review and approval
Show full description
2. Pumping Stations (Raw Water / Clear Water / Sewage)
- Design of electrical systems for:
- Vertical turbine pumps
- Submersible pumps
- Horizontal centrifugal pumps
- Motor selection and control philosophy (DOL, Star-Delta, Soft Starter, VFD)
- MCC & PCC panel design
- PLC-based control system design
- SCADA integration for remote monitoring
- Design of:
- Level control systems (ultrasonic, pressure transmitters)
- Flow measurement (magnetic flow meters)
- Pressure monitoring systems
- Surge protection and interlocking schemes
- Design of standby power systems
3. Water Treatment Plant (WTP) – E&I Design Activities
- Power distribution design for:
- Clarifiers
- Flash mixers
- Flocculators
- Rapid sand filters
- Sludge handling systems
- Instrumentation design for:
- pH analyzers
- Turbidity meters
- Chlorine analyzers
- Flow meters (Raw water, treated water, backwash lines)
- Pressure transmitters
- Level transmitters
- PLC & SCADA architecture development
- Control philosophy documentation
- Field instrument layout and cable routing
- Preparation of:
- Instrument index
- I/O list
- Cable schedule
- Loop diagrams
- Panel GA drawings and wiring diagrams
4. Sewage Treatment Plant (STP) – E&I Design Activities
- Electrical design for:
- Aeration blowers
- SBR/MBBR systems
- RAS/WAS pumps
- Sludge dewatering units
- Decanters
- Hazardous area classification (where applicable)
- Gas detection systems (H₂S, methane)
- DO (Dissolved Oxygen) monitoring systems
- MLSS monitoring systems
- Motorized valves and actuator control
- Integration with centralized SCADA system
- Energy-efficient system design (VFD-based control)
5. Pipe Network & Distribution System
- Electrical & instrumentation design for:
- Flow monitoring stations
- Pressure monitoring stations
- District Metering Areas (DMA)
- Remote Terminal Units (RTUs) design
- Telemetry system design
- Solar-powered instrumentation (where applicable)
- Cathodic protection coordination (if required)
- Control panel design for booster pumping stations
Documentation & Deliverables
- Single Line Diagram (SLD)
- Control Schematics
- Instrument Hook-up Drawings
- Cable Tray Layout
- Earthing Layout
- Lighting Layout
- BOQ & Cost Estimation
- Technical Specifications
- FAT & SAT Documentation
- As-built drawings
Coordination Responsibilities
- Coordinate with:
- Civil team (for foundation & equipment layout)
- Mechanical team (pump & equipment data)
- Process team (treatment philosophy)
- Client & consultants
- Attend technical meetings
- Site visits and commissioning support
- Vendor inspections & FAT participation
Desired Skills
- Strong knowledge of pumping systems
- Understanding of water & wastewater treatment processes
- Knowledge of energy-efficient systems
- Analytical & problem-solving skills
- Good communication & documentation skills
Performance Indicators (KPIs)
- Timely submission of design deliverables
- Accuracy in BOQ and load calculations
- Zero major design revisions
- Smooth commissioning support
- Compliance with project specifications
Required Qualifications
- Bachelor’s Degree in Electrical / Instrumentation Engineering
- 5–12 years experience in Water / Wastewater infrastructure projects
- Knowledge of relevant standards (IEC, IS, IEEE)
- Experience in AutoCAD / EPLAN / ETAP / Dialux
- Experience in PLC (Siemens/Allen Bradley/Schneider) & SCADA systems
**Security clearance**
This role requires the successful candidate to hold a minimum of a Security Check (SC) clearance without any caveats to that clearance.
Due to the nature of work this role will be delivering and for the protection of certain assets, the successful candidate has to be a UK national or in MoD approved cases a Dual National from a non-ITAR country.
We are committed to equal treatment of candidates and promote, as well as foster all forms of diversity within our company. We believe that bringing together people with different backgrounds and perspectives is essential for creating innovative and impactful solutions. Skills, talent, and our people’s ability to dare are the only things that matter !. Bring your unique contributions and help us shape the future.
Check your resume against this job Free, no sign-up. Nothing you paste is stored.
Staying safe while you apply
- Never pay to apply, interview or accept an offer. ROLIVA never asks you for payment to apply to a job.
- Apply only through the official “Apply on the employer’s site” button, on the employer’s own site, and check that a recruiter’s email uses that employer’s own domain rather than a free email address.
- Be cautious of an offer made with no real interview, or pressure to decide quickly or share financial details early.
Does something look wrong with this listing? Use “Report broken link” in the role details, or read ROLIVA’s full job-safety guidance ↗.
Preparing for this role with ROLIVA
- Check the fit.
Compare the requirements with the experience you have confirmed, including gaps.
- Prepare honestly.
Build interview stories and application drafts from your own evidence.
- Keep track.
Save the role and record your own application status and follow-ups.
At a glance
- Work styleOn-site
- Employment typeFull-time
- SeniorityMid level
- Employer posted
- Added to ROLIVA
- Last checked